Software

The Software for MO-05 intended for automation of checking of indicating pressure gages.

 

Download the driver for the Windows XP

5 mb                                                                                           

 

Download the driver for the Windows 7 \ 8

4 mb                                                                                          

 

Download the protocol of exchange

 

Download the program

The program for checking of indicating pressure gages for the calibrated manometer

 

Download the program (expanded version)

Expanded version of the program for checking of indicating pressure gages

 

Checking technique

 

This software can be used with MO-05 with firmware version is not lower than 1.304 (firmware version is displayed whenever you turn on the pressure gauge).

Instruction for start of the program:

  1. Turn on the MO-05 manometer.
  2. Install the driver (once is established).
  3. Start the program.
  4. Choose the bookmark "Master manometer".
  5. To connect the manometer by means of a wire to USB to personal computer port.
  6. Under the Virtual Com Port window to press the Update button.
  7. In the Virtual Com Port window to choose the necessary com the port.
  8. In the Accuracy rating window to choose the accuracy rating corresponding to accuracy rating of MO-05 connected to the personal computer.

Our partners

Additional software

Software ASOMI - automation of metrological services

The system is intended for automation of activity of metrological services of enterprises to integrate measurement instrumentation (SI), as well as control their activities, providing planning, organization and control of metrological works.