Sensors of excessive pressure
Measuring equipment of overpressure МТ100М (Ех)
Sensors of excessive pressure MT100M (Ех)
Compact execution with correction of zero and range.
Sensors of excessive pressure of the MT series are intended for continuous and uniform transformation of pressure of liquids, gas, steam and so on in the unified current output signal (0-5 mA, 4-20 mA). Sensors work with the showing and data-acquisition equipment, regulators, in systems of automatic gaging, in nodes of the heataccount and other devices of automatic equipment.
KPM 3 module
All sensors of excessive pressure MT100M (Ех) are temperature-compensated on "0" and on all range of measurement, and also the possibility of adjustments "0" and range is provided in each sensor. Sensors are convenient for mounting, are not critical to change of polarity at connection, have the DIN 43650 connector. Is an analog of KRT pressure sensors.
For installation of sensors, we recommend to use specially developed switching instrument KPM-2 module the valve having drainage (drain valve). Detailed information on the module is in the section "Auxiliary equipment".
|Measuring range||excessive pressure is 0,01-100 MPas.|
|Limit main blundered
range of changes
|± 0,15; ± 0,25; ± 0,5%;|
|Resistance to climatic influences||-40(-55)°С +80°С.|
|Degree of protection against water and dust||IP65 in accordance with GOST 1425.|
|Relative humidity of air||to 95% at 35 °C.|
|Temperature of the measured environment|| +120°С
(With an additional radiator to +150 °C.)
|On resistance to mechanical influences sensors correspond||to execution of VI in accordance with GOST 12997-84|
|Output signal||0-5; 4-20 mA.|
|Supply voltage||15 to 42V (the EX - 24).|
|Mass of the sensor||no more than 0,3 kg
(With an additional radiator 0,4 kg).
|Sensor length||from 115 mm to 175 mm
(With an additional radiator 205 mm.).
|Body diameter||34 mm.|
|Intertesting interval||3 years.|
|Average term of service||15 years.|
|Threaded connection||M12x1,5, M20x1,5, G1/2.|
|Vibration resistance, vibration strength||10G.|
|Case material||AISI304 stainless steel.|
|Union material||stainless steel 12X18H10T.|
|Sensor||silicon on sapphire is executed on technology.|
|Electric accession:||DIN 43650.|
|Analog||KRT pressure sensor|
The pressure sensor offered by us is used at the enterprises practically of all industries where the main requirements are high quality and accuracy.
For fine tuning "0" and range in some modifications of sensors can the debugging OM-1 module is required. Concerning acquisition of the module address to sales department.
Sample registration of the goods
|Sensors of excessive
- Designation of a type of climatic modification and range of temperatures
- Limit of the allowed main error.
- Measuring range.
- Designation of the threaded connection.
М20х1,5 – М1
G ½ - М2
In lack of designation, M20x1,5 is delivered
- Code of an output signal 42 for a 4-20m.
Circuit diagram of connection of sensors.
An electric power supply of sensors is carried out from a source of a direct current from 15 to 42V, but not less, determined by a formula:
where Unmin - the minimum allowable stress of a power supply at Rn loading, V;
Rn - resistance of loading, (kOhm).
Umin - the minimum allowable stress of a power supply without loading, equal 15V;
Iv - the upper extreme value of an output signal equal 20mA.
Rh - loading resistance. Polarity of a power supply of the sensor can be chosen randomly.
Checking is made according to the recommendation of MI 1997-89, but with connection to terminals 1-2 sensors.
For more information contact our sales department by phone. +7(495) 255-22-96, +7(495) 781-88-63.