Software

List of software for verifying switch equipment

Software (SW) for MO-05, designed to automate the calibration of dial gauges.

Instructions for starting the program:

1. Switch on the MO-05 manometer.
2. Install the driver (installed once).
3. Run the program.
4. Select the "Reference pressure gauge" tab.
5. Connect the pressure gauge with a wire to the USB port of the PC.
6. Under the "Virtual com port" window, click the "Refresh" button.
7. In the "Virtual com port" window, select the desired com port.
8. In the "Accuracy class" window, select the accuracy class corresponding to the MO-05 accuracy class connected to the PC.