Portable set of manometers PKM-MO-05M with accuracy class 0.1; 0.25; 0.15; 0.25 is intended for checking pressure measuring instruments by comparing readings in the range from -0.1 to 0 MPa; From 0 to 100 MPa; From -0.1 to 0.4 MPa. With the limit of permissible reduced error, % of the measurement subrange: 0.1; 0.15; 0.25; 0.4. PKM-MO-05M is equipped with high-precision manometers, Version 5 and Version 5ms.
| Limit of permissible reduced error, % of the measurement subrange: | 0,1; 0,15; 0,25; 0,4 |
| Measurement units: | Pa, kPa, mmHg (for manometers with UPL up to 40 kPa) kPa, MPa, kgf/cm2 (for manometers with UPL 0,25; 2,5; 16; 60; 100 MPa) |
Поддиапазоны измерений, МПа
|
|
| Calibration interval |
2 years - ±0,1; ±0,15; ±0,25; ±0,4 % |
| Additional error caused by deviation of the ambient temperature from the temperature range от +5 до +50 °С within operating temperature range, %/10 °С | 0,5γ (Pressure gauges produced with climatic version from +5 to +50 °С) |
|
For resistance to climatic influences they are designed in accordance with ГОСТ 15150-69 |
|
| Degree of protection against the ingress of dust and water, in accordance with ГОСТ 14254-2015 | IP65 |
| Amount of subranges in one manometer | 5 или 6 |
| In accordance with GOST R 52931-2008, in terms of resistance to mechanical stress it corresponds to the execution group | N4 |
| Electrical power is provided by |
|
| Continuous operation time of the MO-05M manometer on batteries | not less than 300 hours |
| Mean time between failures | 150000 hours |
| Weight of the kit, kg, no more than | 4 |
| Overall dimensions (widthXlengthXheight), mm, no more than | 500х30х120 |
| Threaded connection of the measuring head | М20х1,5 |
| Connection material | stainless steel AISI 304 |
| Manometer terminal material МО-05М | aluminum alloy D16T |
For more information contact our sales department by phone. +7 (495) 255-22-96, +7(495) 781-88-63.
@gidrogazofficial
Phone: +7 (495) 255-22-96
(multi-line)
Gidrogazkomplekt
Web-studio: Theriatex © 2010-2024
